Hypertherm 029323 TS2 Coolant Temp Switch

Product Description

The Hypertherm 029323 TS2 Coolant Temp Switch is a replacement part for Hypertherm plasma cutting systems. This switch is responsible for monitoring the temperature of the coolant in the plasma cutting torch and shutting off the system if the coolant temperature exceeds a safe level.

Specifications

• Brand: Hypertherm
• Part Number: 029323
• Part Description: TS2 Coolant Temp Switch
• Voltage: 24 VDC
• Current: 10 A
• Temperature Range: 32°F to 212°F (0°C to 100°C)

Installation

The Hypertherm 029323 TS2 Coolant Temp Switch is a direct replacement for the original switch. To install the switch, simply remove the old switch and replace it with the new switch. Be sure to tighten the mounting screws securely.

Troubleshooting

If the Hypertherm 029323 TS2 Coolant Temp Switch is not working properly, there are a few things you can check:

• Check the wiring. Make sure that the switch is properly wired to the plasma cutting system.
• Check the switch for damage. If the switch is damaged, it will need to be replaced.
• Check the coolant temperature. Make sure that the coolant temperature is within the specified range.

If you have checked all of these things and the switch is still not working, you may need to contact Hypertherm for further assistance.

Conclusion

The Hypertherm 029323 TS2 Coolant Temp Switch is an important part of your plasma cutting system. By monitoring the temperature of the coolant and shutting off the system if the temperature exceeds a safe level, this switch helps to protect your system from damage.