Hypertherm 229408 Original Part 109393 THERMISTOR SUBASSEMBLY:HPR/HSD COOLANT 3/8 NATIONAL PIPE THREAD WI...

Product Details

• Brand: Hypertherm
• Part number: 229408
• Description: Original Part 109393 THERMISTOR SUBASSEMBLY:HPR/HSD COOLANT 3/8 NATIONAL PIPE THREAD WI...

Features

• Genuine Hypertherm replacement part
• Ensures proper fit and function
• Backed by Hypertherm's warranty

Compatibility

• Hypertherm HPR and HSD plasma cutters

Installation

1. Disconnect the power supply from the plasma cutter.
2. Remove the old thermistor subassembly.
3. Install the new thermistor subassembly.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If the plasma cutter is not working properly after installing the new thermistor subassembly, check the following:

• Ensure that the thermistor subassembly is properly installed.
• Check the wiring connections to the thermistor subassembly.
• Check the thermistor subassembly for damage.

If the problem persists, contact Hypertherm technical support for assistance.

Warranty

Hypertherm warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. If the product fails during the warranty period, Hypertherm will repair or replace it at no charge.

Disclaimer

The information in this document is subject to change without notice. Hypertherm makes no warranty, expressed or implied, regarding the accuracy or completeness of the information provided.

Contact Information

For more information, contact Hypertherm at:

• Website: www.hypertherm.com
• Phone: 1-800-634-4117
• Email: [email protected]

Similar Parts

229224
Original part 109393 THERMISTOR SUBASSEMBLY:HPR/HSD COOL

006152
CHECK VALVE:8MM PUSH-IN 1/8" MALE NATIONAL PIPE THREAD

229844
REGULATOR SUBASSEMBLY:WATER PRESET TO 35 POUNDS PER SQUARE INCH 1/4" NATIONAL PIPE THREA...

229741
FLOW METER SUBASSEMBLY:.5-5 GALLONS PER MINUTE ROTOR 1/4 INCH FEMALE NATIONAL PIPE THREA...

228337
KIT:HPR Control Board Replacement PCB3 Old part # 041909 USE NEW PART # 228548

041909
superseded NEW PART # 228548 PCB3 Control Board for HPR ORDER NEW PART # 228337

228993
KIT:SOL VALVE SUBASSEMBLY HPR/HSD

229229
SOLENOID VALVE SUBASSEMBLY:HPR/HSD

128654
obsolete USE PART # 128239 Bullet replacement kit for torch -USE PART # 128239

OLD 031114
USE NEW PART # 128384 Coolant pump - ProCon #101B100F11BC ** send copy of PO with ...