Hypertherm 005199 TSW1 Chopper Temp Switch

Description

The Hypertherm 005199 TSW1 Chopper Temp Switch is a temperature switch used in Hypertherm plasma cutters. It is a normally closed switch that opens when the temperature reaches 185°F (85°C). The switch is used to protect the chopper from overheating.

Specifications

• Brand: Hypertherm
• Part number: 005199
• Part description: TSW1 Chopper Temp Switch
• Temperature range: 185°F (85°C)
• Switch type: Normally closed
• Mounting: 1/4-20 UNC-2B thread
• Weight: 0.5 oz (14 g)

Installation

To install the Hypertherm 005199 TSW1 Chopper Temp Switch, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old temperature switch.
3. Install the new temperature switch.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If the Hypertherm 005199 TSW1 Chopper Temp Switch is not working properly, check the following:

• The temperature switch is properly installed.
• The temperature switch is not damaged.
• The temperature switch is not shorted to ground.
• The temperature switch is not open-circuited.

If the temperature switch is still not working properly, replace it with a new one.

Conclusion

The Hypertherm 005199 TSW1 Chopper Temp Switch is a critical component of Hypertherm plasma cutters. It is important to keep the temperature switch in good working order to prevent the chopper from overheating.