Hypertherm 005102 TS1 Transformer Temp Switch

Description

The Hypertherm 005102 TS1 Transformer Temp Switch is a replacement part for Hypertherm plasma cutters. This switch is used to monitor the temperature of the transformer and shut off the power if the transformer overheats.

Specifications

• Brand: Hypertherm
• Part number: 005102
• Part description: TS1 Transformer Temp Switch
• Temperature range: 150-250°F
• Maximum current: 10 amps
• Voltage: 120V AC

Installation

To install the Hypertherm 005102 TS1 Transformer Temp Switch, follow these steps:

1. Disconnect the power to the plasma cutter.
2. Remove the old transformer temp switch.
3. Install the new transformer temp switch.
4. Reconnect the power to the plasma cutter.

Troubleshooting

If the Hypertherm 005102 TS1 Transformer Temp Switch is not working properly, check the following:

• The switch is properly installed.
• The switch is not damaged.
• The wiring is correct.
• The transformer is not overheating.

If you have checked all of these things and the switch is still not working, contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm 005102 TS1 Transformer Temp Switch is an important safety device that helps to protect the plasma cutter from overheating. By following the installation and troubleshooting instructions in this document, you can ensure that the switch is working properly and that your plasma cutter is safe to use.