Hypertherm 228721 KIT:DURAMAX HAND TORCH TRIGGER/SPRING REPLACEMENT

Product Description

The Hypertherm 228721 KIT:DURAMAX HAND TORCH TRIGGER/SPRING REPLACEMENT is a genuine Hypertherm replacement part for Duramax hand torches. This kit includes the trigger and spring needed to replace worn or damaged parts.

Features

• Genuine Hypertherm replacement part
• Includes trigger and spring
• Easy to install

Specifications

• Brand: Hypertherm
• Part number: 228721
• Part description: KIT:DURAMAX HAND TORCH TRIGGER/SPRING REPLACEMENT

Installation

To install the trigger and spring, follow these steps:

1. Remove the old trigger and spring from the hand torch.
2. Insert the new trigger into the hand torch.
3. Insert the new spring into the hand torch.
4. Reattach the hand torch to the plasma cutter.

Safety Precautions

When working on plasma cutters, always follow these safety precautions:

• Wear proper protective gear, including gloves, eye protection, and a face shield.
• Make sure the plasma cutter is turned off and unplugged before working on it.
• Allow the plasma cutter to cool down completely before handling it.
• Never touch the electrode or nozzle of the plasma cutter while it is in operation.
• Keep the plasma cutter away from flammable materials.

Troubleshooting

If you are experiencing problems with the trigger or spring, here are some troubleshooting tips:

• Check the trigger and spring for damage. If either part is damaged, replace it.
• Make sure the trigger and spring are properly installed.
• Clean the hand torch and trigger assembly with a mild detergent and water.
• If the problem persists, contact Hypertherm customer service for assistance.

Warranty

The Hypertherm 228721 KIT:DURAMAX HAND TORCH TRIGGER/SPRING REPLACEMENT is backed by a one-year warranty.