Hypertherm 228720 KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH

Product Description

The Hypertherm 228720 KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH is a genuine Hypertherm replacement part.

Compatibility

This part is compatible with the following Hypertherm plasma cutting systems:

• Duramax
• Duramax Hyamp
• MRT Machine Torch

Installation

To install the 228720 KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH, follow these steps:

1. Disconnect the power to the plasma cutting system
2. Remove the old torch cap sensor switch
3. Install the new torch cap sensor switch
4. Reconnect the power to the plasma cutting system
5. Test the torch cap sensor switch to make sure it is working properly

Troubleshooting

If the torch cap sensor switch is not working properly, check the following:

• Make sure the torch cap sensor switch is properly installed
• Make sure the torch cap sensor switch is not damaged
• Check the wiring to the torch cap sensor switch
• Check the power supply to the torch cap sensor switch

If you have checked all of the above and the torch cap sensor switch is still not working properly, contact Hypertherm technical support for assistance.

Part Number

The part number for the Hypertherm 228720 KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH is 228720 .

Similar Parts

228719
KIT:DURAMAX/DURAMAX HYAMP/RT HAND TORCH CAP SENSOR SWITCH

428162
KIT:DURAMAX HYAMP HAND TORCH TRIGGGER START SWITCH REPLACEMENT

228791
KIT:DURAMAX MRT MECHANIZED 50'

059520
DURAMAX HYAMP 180 DEGREE MACHINE TORCH ASSEMBLY 25'

128639
PowerMax 1250 Cap Sensor Switch

228736
KIT:M65/M65m/M85/M85m/M105/M105m/MRT ADAPTER RING

228737
KIT:M65/M85/M105/MRT POSITIONING SLEEVE

228735
KIT:M65/M65m/M85/M85m/M105/M105m/MRT MOUNTING SLEEVE

220977
CAP:DURAMAX HYAMP

420156
CAP:DURAMAX HYAMP OHMIC