Hypertherm 128639 PowerMax 1250 Cap Sensor Switch

Product Description

The Hypertherm 128639 PowerMax 1250 Cap Sensor Switch is a critical component of the PowerMax 1250 plasma cutting system. This switch is responsible for detecting when the cutting torch is properly seated in the cutting table. If the switch is not functioning properly, the torch will not be able to fire, and the cutting process will be interrupted.

Specifications

• Part Number: 128639
• Brand: Hypertherm
• Product Line: PowerMax 1250
• Description: Cap Sensor Switch
• Weight: 0.5 lbs
• Dimensions: 3" x 2" x 1"

Installation

The Hypertherm 128639 PowerMax 1250 Cap Sensor Switch is a simple plug-and-play component. To install the switch, simply unplug the old switch from the control box and plug in the new switch. The switch is located on the front of the control box.

Troubleshooting

If the Hypertherm 128639 PowerMax 1250 Cap Sensor Switch is not functioning properly, the following troubleshooting steps can be taken:

1. Check the connection between the switch and the control box. Make sure that the connection is secure and that there are no loose wires.
2. If the connection is secure, check the switch for damage. If the switch is damaged, it will need to be replaced.
3. If the switch is not damaged, the problem may be with the control box. In this case, the control box will need to be serviced or replaced.

Conclusion

The Hypertherm 128639 PowerMax 1250 Cap Sensor Switch is a critical component of the PowerMax 1250 plasma cutting system. This switch is responsible for detecting when the cutting torch is properly seated in the cutting table. If the switch is not functioning properly, the torch will not be able to fire, and the cutting process will be interrupted. By following the troubleshooting steps outlined in this document, you can quickly and easily resolve any issues with the Hypertherm 128639 PowerMax 1250 Cap Sensor Switch.