markdown

Hypertherm 228586 KIT:PROX SWITCH SUBASSEMBLY LIFTER LOWER LIMIT

Product Description

The Hypertherm 228586 KIT:PROX SWITCH SUBASSEMBLY LIFTER LOWER LIMIT is a genuine Hypertherm replacement part for your Hypertherm plasma cutting system. This kit includes the following components:

• Proximity switch subassembly
• Lifter lower limit switch
• Mounting hardware

Specifications

• Brand: Hypertherm
• Part number: 228586
• Part description: KIT:PROX SWITCH SUBASSEMBLY LIFTER LOWER LIMIT
• Weight: 0.5 lbs
• Dimensions: 6 x 4 x 2 inches

Compatibility

This kit is compatible with the following Hypertherm plasma cutting systems:

• Powermax30XP
• Powermax45XP
• Powermax65XP
• Powermax85XP
• Powermax105XP
• Powermax125XP

Installation

To install this kit, follow these steps:

1. Turn off the power to your plasma cutting system.
2. Disconnect the negative cable from the battery.
3. Remove the old proximity switch subassembly and lifter lower limit switch.
4. Install the new proximity switch subassembly and lifter lower limit switch.
5. Reconnect the negative cable to the battery.
6. Turn on the power to your plasma cutting system.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, please refer to the following troubleshooting tips:

• Check the proximity switch subassembly and lifter lower limit switch for damage.
• Check the wiring connections for the proximity switch subassembly and lifter lower limit switch.
• Clean the proximity switch subassembly and lifter lower limit switch.
• Replace the proximity switch subassembly and lifter lower limit switch.

Conclusion

The Hypertherm 228586 KIT:PROX SWITCH SUBASSEMBLY LIFTER LOWER LIMIT is a genuine Hypertherm replacement part that is essential for the proper operation of your Hypertherm plasma cutting system. By following the installation and troubleshooting tips in this document, you can ensure that your plasma cutting system is operating at peak performance.