Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY

Description

The Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY is a genuine Hypertherm replacement part for your Hypertherm plasma cutting system. This kit includes all of the necessary parts to replace a broken or damaged breakaway retaining tether subassembly.

Features

• Genuine Hypertherm replacement part
• Includes all necessary parts to replace a broken or damaged breakaway retaining tether subassembly
• Easy to install

Specifications

• Part number: 228940
• Brand: Hypertherm
• Part description: KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY

Applications

The Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY is compatible with the following Hypertherm plasma cutting systems:

• Powermax45XP
• Powermax65XP

Installation

To install the Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY, follow these steps:

1. Turn off the power to your plasma cutting system.
2. Disconnect the torch from the plasma cutting system.
3. Remove the old breakaway retaining tether subassembly.
4. Install the new breakaway retaining tether subassembly.
5. Reconnect the torch to the plasma cutting system.
6. Turn on the power to your plasma cutting system.

Troubleshooting

If you are having trouble with the Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY, here are some troubleshooting tips:

• Check the connections between the breakaway retaining tether subassembly and the torch.
• Make sure that the breakaway retaining tether subassembly is properly installed.
• If you are still having trouble, contact Hypertherm technical support for assistance.

Ordering Information

The Hypertherm 228940 KIT:BREAK-AWAY RETAINING TETHER SUBASSEMBLY can be ordered from your local Hypertherm dealer.