Hypertherm 228993 KIT:SOL VALVE SUBASSEMBLY HPR/HSD

Product Description

The Hypertherm 228993 KIT:SOL VALVE SUBASSEMBLY HPR/HSD is a genuine Hypertherm replacement part. This kit includes all of the necessary components to rebuild the solenoid valve on your Hypertherm HPR or HSD plasma cutting system.

Features

• Includes all necessary components to rebuild the solenoid valve
• Genuine Hypertherm replacement part
• Backed by Hypertherm's warranty

Specifications

• Brand: Hypertherm
• Part number: 228993
• Part description: KIT:SOL VALVE SUBASSEMBLY HPR/HSD

Compatibility

The Hypertherm 228993 KIT:SOL VALVE SUBASSEMBLY HPR/HSD is compatible with the following Hypertherm plasma cutting systems:

• HPR260XD
• HPR400XD
• HPR800XD
• HSD130
• HSD130i

Installation

The Hypertherm 228993 KIT:SOL VALVE SUBASSEMBLY HPR/HSD can be installed by following these steps:

1. Turn off the power to your plasma cutting system.
2. Disconnect the power cable from the plasma cutting system.
3. Remove the front panel of the plasma cutting system.
4. Locate the solenoid valve.
5. Remove the old solenoid valve.
6. Install the new solenoid valve.
7. Replace the front panel of the plasma cutting system.
8. Reconnect the power cable to the plasma cutting system.
9. Turn on the power to your plasma cutting system.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, the following troubleshooting steps may help:

1. Check the solenoid valve for leaks.
2. Check the solenoid valve for clogs.
3. Check the solenoid valve for damage.
4. If the solenoid valve is leaking, clogged, or damaged, replace it with a new one.

If you are still experiencing problems with your Hypertherm plasma cutting system, please contact Hypertherm technical support for assistance.

Warranty

The Hypertherm 228993 KIT:SOL VALVE SUBASSEMBLY HPR/HSD is backed by Hypertherm's warranty. For more information on Hypertherm's warranty, please visit their website.