Hypertherm 005195 Limit Switch

Part Description

The Hypertherm 005195 is a limit switch for the Comm THC SNSR: IND PROX. It is a normally open switch with a 1/4" NPT thread. The switch is rated for 10 amps at 125 VAC.

Specifications

Brand: Hypertherm
Part number: 005195
Part description: limit switch for Comm THC SNSR: IND PROX
Type: normally open
Thread size: 1/4" NPT
Rating: 10 amps at 125 VAC

Applications

The Hypertherm 005195 limit switch is used in a variety of applications, including:

CNC plasma cutting
Laser cutting
Waterjet cutting
Welding

Installation

The Hypertherm 005195 limit switch is installed by threading it into a 1/4" NPT hole. The switch should be mounted in a location where it will not be damaged by the cutting process.

Wiring

The Hypertherm 005195 limit switch has two wires: a black wire and a white wire. The black wire is the hot wire and the white wire is the neutral wire. The switch should be wired in series with the load.

Troubleshooting

If the Hypertherm 005195 limit switch is not working, there are a few things that you can check:

Check the wiring to make sure that it is correct.
Check the switch to make sure that it is not damaged.
Check the load to make sure that it is not overloaded.

If you have checked all of these things and the switch is still not working, you may need to replace it.

Similar Parts

228587
KIT:PROX SWITCH SUBASSEMBLY LIFTER UPPER LIMIT

228586
KIT:PROX SWITCH SUBASSEMBLY LIFTER LOWER LIMIT

228608
KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch

027024
Air Cylinder, IND Sensor, UW HS

123802
CABLE:HPR AUTO GAS MC PRESS SNSR

123795
SGL Chan Snsr Cable, 30' Fast Laser

109483
CUR SNSR:HALL 200A 4V

051008
INTFC:CAP DISP SNSR Fast Laser

051010
SNSR:CAP DISP Fast Laser

127155
**WE HAVE AT CSI** Pressure Switch:Break Away C-THC for collision device