Hypertherm 228608 KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch

Product Description

The Hypertherm 228608 KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch is a genuine Hypertherm replacement part. This kit includes the following items:

• 1x Break-away sensor
• 1x Proximity switch
• 1x Mounting bracket
• 1x Cable assembly

This kit is used to replace a damaged or faulty break-away sensor or proximity switch on Hypertherm plasma cutting torches. The break-away sensor is designed to protect the torch from damage if it is accidentally dropped or bumped. The proximity switch is used to detect the presence of the workpiece and to control the torch height.

Specifications

• Brand: Hypertherm
• Part number: 228608
• Part description: KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch
• Weight: 0.5 lbs
• Dimensions: 6 x 4 x 2 inches

Installation

To install the Hypertherm 228608 KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch, follow these steps:

1. Disconnect the power from the plasma cutting torch.
2. Remove the old break-away sensor and proximity switch.
3. Mount the new break-away sensor and proximity switch to the torch using the supplied mounting bracket.
4. Connect the cable assembly to the break-away sensor and proximity switch.
5. Reconnect the power to the plasma cutting torch.

Troubleshooting

If the Hypertherm 228608 KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch is not working properly, check the following:

• Make sure that the break-away sensor and proximity switch are properly installed.
• Check the cable assembly for damage.
• Check the power supply to the plasma cutting torch.

If the problem persists, contact Hypertherm technical support for assistance.

Warranty

The Hypertherm 228608 KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch is backed by a one-year warranty. For more information, please see the Hypertherm warranty policy.