Hypertherm PowerMax 1250 Kit: T80 Start Switch Replacement (128642)

Product Description

The Hypertherm PowerMax 1250 Kit is a replacement kit for the T80 Start Switch on PowerMax 1250 plasma cutters. The kit includes the following items:

• T80 Start Switch
• Mounting hardware

Installation Instructions

To install the T80 Start Switch Replacement Kit, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old T80 Start Switch from the plasma cutter.
3. Install the new T80 Start Switch using the mounting hardware included in the kit.
4. Reconnect the power supply to the plasma cutter.
5. Test the new T80 Start Switch to make sure it is working properly.

Troubleshooting

If the T80 Start Switch is not working properly, check the following:

• The T80 Start Switch is properly installed.
• The mounting hardware is tight.
• The power supply is properly connected to the plasma cutter.
• The plasma cutter is turned on.

If the T80 Start Switch is still not working properly, contact Hypertherm Technical Support for assistance.

Safety Precautions

When working on a plasma cutter, always follow these safety precautions:

• Wear safety glasses.
• Wear gloves.
• Wear a face shield.
• Do not touch the electrode or nozzle while the plasma cutter is on.
• Keep the plasma cutter away from flammable materials.
• Be aware of the potential for electrical shock.

Conclusion

The Hypertherm PowerMax 1250 Kit is a quick and easy way to replace the T80 Start Switch on your PowerMax 1250 plasma cutter. By following the installation instructions and safety precautions, you can safely and easily replace the T80 Start Switch and get your plasma cutter back up and running.