Hypertherm Swirl Ring 100 Amp (020750)

Product Description

The Hypertherm Swirl Ring 100 Amp (020750) is a genuine Hypertherm replacement part. It is designed for use with Hypertherm Powermax1000 and Powermax1050 plasma cutters. The swirl ring helps to create a vortex of plasma gas, which helps to improve the cutting performance of the plasma cutter.

Specifications

• Part Number: 020750
• Brand: Hypertherm
• Material: Copper
• Dimensions: 1.125" OD x 0.75" ID x 0.375" H
• Weight: 0.1 lbs

Features

• Genuine Hypertherm replacement part
• Helps to create a vortex of plasma gas
• Improves the cutting performance of the plasma cutter
• Easy to install

Compatibility

The Hypertherm Swirl Ring 100 Amp (020750) is compatible with the following Hypertherm plasma cutters:

• Powermax1000
• Powermax1050

Installation

The Hypertherm Swirl Ring 100 Amp (020750) is easy to install. Follow these steps:

1. Remove the old swirl ring from the plasma cutter.
2. Clean the area around the swirl ring.
3. Apply a small amount of grease to the new swirl ring.
4. Insert the new swirl ring into the plasma cutter.
5. Tighten the swirl ring until it is snug.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutter, the swirl ring may be the cause. Check the swirl ring for damage or wear. If the swirl ring is damaged or worn, it should be replaced.

Conclusion

The Hypertherm Swirl Ring 100 Amp (020750) is an important part of the Hypertherm Powermax1000 and Powermax1050 plasma cutters. It helps to create a vortex of plasma gas, which helps to improve the cutting performance of the plasma cutter. If you are experiencing problems with your Hypertherm plasma cutter, the swirl ring may be the cause.