Hypertherm Swirl Ring PAC 100 TCH
Brand
Hypertherm
Part Number
220013
Part Description
Swirl Ring PAC 100 TCH
Specifications
- Material: Copper
- Dimensions: 1.5" OD x 0.75" ID x 0.25" H
- Weight: 0.5 oz
Features
- Improved gas flow for better cut quality
- Reduced dross and spatter
- Longer electrode life
- Easy to install
Applications
- Plasma cutting
- Metal fabrication
- Welding
How to Use
- Remove the old swirl ring from the torch.
- Clean the torch body and the swirl ring seat.
- Apply a small amount of anti-seize to the new swirl ring.
- Screw the new swirl ring onto the torch body.
- Tighten the swirl ring until it is snug.
Safety Precautions
- Wear safety glasses when working with plasma cutting equipment.
- Do not touch the swirl ring while the torch is in operation.
- Allow the torch to cool down before handling it.
Troubleshooting
If you are experiencing problems with your plasma cutter, the swirl ring may be the cause. Here are some troubleshooting tips:
- Check the swirl ring for damage. If the swirl ring is damaged, it will need to be replaced.
- Clean the swirl ring and the torch body. A dirty swirl ring can cause the torch to malfunction.
- Check the swirl ring for proper alignment. The swirl ring must be properly aligned with the torch body in order to function properly.
If you are still experiencing problems after following these steps, please contact Hypertherm customer service for assistance.
Conclusion
The Hypertherm Swirl Ring PAC 100 TCH is a high-quality replacement part that will improve the performance of your plasma cutter. It is easy to install and comes with a one-year warranty.
Similar Parts
020048
Swirl Ring for PAC 500
020040
Swirl Ring: PAC 500 .220
220244
CHECK CSI STOCK Swirl Ring:CCW Tch Hyspeed
028499
LEADS:PAC180 TCH PWR 20'LEADS:PAC180 TCH PWR 20'
128278
KIT:C-THC TCH LFT 1-3/4" TCH
120252
Swirl Ring, 100 amp Oxygen, CCW
C107-283
Swirl Ring, 100 Amp, MS/SS/AL, Air
C107-142
Swirl Ring, 50/70/100 Amp
020750
Swirl Ring 100 Amp
020637
100 amp swirl ring, Hypertherm HD3070