Hypertherm 220051 PowerMax 1650 Swirl Ring 100 A

Product Description

The Hypertherm 220051 PowerMax 1650 Swirl Ring 100 A is a genuine Hypertherm replacement part. This swirl ring is designed for use with the PowerMax 1650 plasma cutting system. It is made of durable materials and is built to last.

Specifications

• Brand: Hypertherm
• Part number: 220051
• Description: PowerMax 1650 Swirl Ring 100 A
• Material: Stainless steel
• Dimensions: 1.5" OD x 0.75" ID x 0.25" thick
• Weight: 0.1 lbs

Features

• Genuine Hypertherm replacement part
• Made of durable materials
• Built to last
• Easy to install

Compatibility

The Hypertherm 220051 PowerMax 1650 Swirl Ring 100 A is compatible with the following plasma cutting systems:

• Hypertherm PowerMax 1650

Installation

To install the Hypertherm 220051 PowerMax 1650 Swirl Ring 100 A, follow these steps:

1. Turn off the plasma cutting system and disconnect the power cord.
2. Remove the old swirl ring by unscrewing it from the torch body.
3. Clean the torch body and the new swirl ring with a clean cloth.
4. Apply a small amount of anti-seize compound to the threads of the new swirl ring.
5. Screw the new swirl ring onto the torch body until it is snug.
6. Reconnect the power cord and turn on the plasma cutting system.

Troubleshooting

If you are experiencing problems with your Hypertherm PowerMax 1650 plasma cutting system, the following troubleshooting tips may help:

• Check the swirl ring for damage. If the swirl ring is damaged, it will need to be replaced.
• Clean the swirl ring and the torch body. A dirty swirl ring or torch body can cause the plasma arc to become unstable.
• Check the anti-seize compound on the threads of the swirl ring. If there is not enough anti-seize compound, the swirl ring may become stuck.
• Make sure that the swirl ring is properly installed. If the swirl ring is not properly installed, it will not be able to create a proper plasma arc.

If you are still experiencing problems, please contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 220051 PowerMax 1650 Swirl Ring 100 A is a genuine Hypertherm replacement part that is made of durable materials and built to last. It is easy to install and compatible with the Hypertherm PowerMax 1650 plasma cutting system. If you are experiencing problems with your Hypertherm PowerMax 1650 plasma cutting system, the troubleshooting tips in this document may help.