Hypertherm 006077 Check Valve - 1/8 FPT

Product Description

The Hypertherm 006077 Check Valve is a 1/8 FPT check valve that is used to prevent backflow in a fluid system. The valve is made of brass and has a Buna-N seal. It is rated for a maximum pressure of 150 psi and a maximum temperature of 250°F.

Features

• Prevents backflow in a fluid system
• Made of brass with a Buna-N seal
• Rated for a maximum pressure of 150 psi and a maximum temperature of 250°F

Applications

The Hypertherm 006077 Check Valve can be used in a variety of applications, including:

• Water systems
• Air systems
• Oil systems
• Gas systems

Installation

The Hypertherm 006077 Check Valve can be installed in any orientation. The valve should be installed with the arrow on the body pointing in the direction of flow. The valve can be installed using a wrench or a screwdriver.

Maintenance

The Hypertherm 006077 Check Valve is a maintenance-free device. However, the valve should be inspected periodically for signs of wear or damage. The valve should be replaced if it is damaged or if it fails to function properly.

Troubleshooting

If the Hypertherm 006077 Check Valve is not functioning properly, there are a few things that can be checked:

• The valve may be installed incorrectly. Make sure that the arrow on the body is pointing in the direction of flow.
• The valve may be damaged. Inspect the valve for signs of wear or damage.
• The valve may be clogged. Clean the valve with a mild detergent and water.

If the valve is still not functioning properly after checking these things, it should be replaced.

Conclusion

The Hypertherm 006077 Check Valve is a reliable and durable check valve that can be used in a variety of applications. The valve is easy to install and maintain, and it is backed by Hypertherm's warranty.