Hypertherm 006100 Solenoid Valve 150# 1/8 FPT Pin

Product Description

The Hypertherm 006100 Solenoid Valve is a 150# 1/8 FPT pin valve. It is designed for use with Hypertherm plasma cutting systems. The valve is made of brass and has a Buna-N seal. It has a maximum operating pressure of 150 psi and a maximum operating temperature of 180°F.

Features

• 150# 1/8 FPT pin valve
• For use with Hypertherm plasma cutting systems
• Made of brass with a Buna-N seal
• Maximum operating pressure of 150 psi
• Maximum operating temperature of 180°F

Applications

The Hypertherm 006100 Solenoid Valve is used to control the flow of gas to the plasma cutting torch. It is typically used in conjunction with a pressure regulator and a flowmeter.

Installation

The Hypertherm 006100 Solenoid Valve can be installed in any orientation. It should be installed in a location that is protected from the elements. The valve should be connected to the gas supply line using a 1/8 FPT fitting. The valve should also be connected to the plasma cutting torch using a 1/8 FPT fitting.

Maintenance

The Hypertherm 006100 Solenoid Valve requires minimal maintenance. The valve should be inspected periodically for leaks and damage. The valve should also be cleaned periodically to remove any dirt or debris that may have accumulated.

Troubleshooting

If the Hypertherm 006100 Solenoid Valve is not working properly, there are a few things that can be checked. First, check the gas supply line to make sure that there is gas flowing to the valve. Second, check the valve to make sure that it is open. Third, check the valve for leaks. If the valve is leaking, it will need to be replaced.

Conclusion

The Hypertherm 006100 Solenoid Valve is a reliable and durable valve that is ideal for use with Hypertherm plasma cutting systems. The valve is easy to install and maintain, and it requires minimal maintenance.