Hypertherm 006075 Check Valve

Part Description

The Hypertherm 006075 check valve is a 1/4 FPT check valve that is used to prevent backflow in a fluid system. The valve is made of brass and has a Buna-N seal. It has a maximum working pressure of 150 psi and a maximum temperature of 250°F.

Features

• Prevents backflow in a fluid system
• Made of brass with a Buna-N seal
• Maximum working pressure of 150 psi
• Maximum temperature of 250°F

Applications

The Hypertherm 006075 check valve can be used in a variety of applications, including:

• Water systems
• Air systems
• Oil systems
• Gas systems

Installation

The Hypertherm 006075 check valve can be installed in any position. The valve should be installed with the arrow on the body pointing in the direction of flow. The valve can be installed using a wrench or a screwdriver.

Maintenance

The Hypertherm 006075 check valve requires no maintenance. The valve should be inspected periodically for signs of wear or damage. If the valve is damaged, it should be replaced.

Troubleshooting

If the Hypertherm 006075 check valve is not working properly, there are a few things that can be checked:

• Make sure the valve is installed in the correct direction.
• Make sure the valve is not damaged.
• Make sure the valve is not clogged.
• If the valve is still not working properly, it should be replaced.