Hypertherm 428971 KIT:XPR CHECK VALVE UPGRADE

Product Description

The Hypertherm 428971 KIT:XPR CHECK VALVE UPGRADE is a kit that includes all of the necessary parts to upgrade the check valve on a Hypertherm XPR plasma cutting system. The kit includes a new check valve, a new O-ring, and a new spring.

Features

• Upgraded check valve design provides improved performance and reliability
• New O-ring and spring ensure a leak-free seal
• Easy to install

Benefits

• Improved cutting performance
• Reduced downtime
• Increased productivity

Applications

The Hypertherm 428971 KIT:XPR CHECK VALVE UPGRADE can be used on all Hypertherm XPR plasma cutting systems.

Specifications

• Check valve material: Stainless steel
• O-ring material: Buna-N
• Spring material: Stainless steel
• Maximum operating pressure: 150 psi
• Maximum operating temperature: 125°F

Installation

The Hypertherm 428971 KIT:XPR CHECK VALVE UPGRADE can be installed by following these steps:

1. Turn off the power to the plasma cutting system.
2. Disconnect the gas supply line from the check valve.
3. Remove the old check valve from the plasma cutting system.
4. Install the new check valve into the plasma cutting system.
5. Reconnect the gas supply line to the check valve.
6. Turn on the power to the plasma cutting system.

Troubleshooting

If the Hypertherm 428971 KIT:XPR CHECK VALVE UPGRADE is not working properly, there are a few things you can check:

• Make sure that the check valve is installed correctly.
• Make sure that the O-ring and spring are in place.
• Make sure that the gas supply line is connected properly.
• Make sure that the check valve is not damaged.

If you have checked all of these things and the check valve is still not working properly, you may need to contact Hypertherm for assistance.