Monthly Basis
What's happening this month?

Hypertherm 420159 SWIRL RING:DURAMAX HYAMP FINECUT

Product Description

The Hypertherm 420159 SWIRL RING:DURAMAX HYAMP FINECUT is a genuine Hypertherm replacement part. It is made from high-quality materials and is designed to provide long-lasting performance. This swirl ring is compatible with the following Hypertherm plasma cutters:

  • Powermax45XP
  • Powermax65
  • Powermax85
  • Powermax105
  • Powermax125

Features

  • Genuine Hypertherm replacement part
  • Made from high-quality materials
  • Designed for long-lasting performance
  • Compatible with the following Hypertherm plasma cutters:
  • Powermax45XP
  • Powermax65
  • Powermax85
  • Powermax105
  • Powermax125

Specifications

  • Part number: 420159
  • Description: SWIRL RING:DURAMAX HYAMP FINECUT
  • Brand: Hypertherm

Installation

To install the Hypertherm 420159 SWIRL RING:DURAMAX HYAMP FINECUT, follow these steps:

  1. Turn off the power to the plasma cutter.
  2. Remove the old swirl ring.
  3. Clean the area around the swirl ring.
  4. Apply a small amount of grease to the new swirl ring.
  5. Insert the new swirl ring into the plasma cutter.
  6. Tighten the swirl ring until it is snug.
  7. Turn on the power to the plasma cutter.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutter, the swirl ring may be the cause. Here are some troubleshooting tips:

  • Check the swirl ring for damage. If the swirl ring is damaged, it will need to be replaced.
  • Clean the swirl ring and the area around it. Dirt and debris can cause the swirl ring to malfunction.
  • Lubricate the swirl ring. A small amount of grease will help the swirl ring to move smoothly.
  • If you are still experiencing problems, contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm 420159 SWIRL RING:DURAMAX HYAMP FINECUT is a genuine Hypertherm replacement part that is made from high-quality materials and is designed to provide long-lasting performance. This swirl ring is compatible with the following Hypertherm plasma cutters:

  • Powermax45XP
  • Powermax65
  • Powermax85
  • Powermax105
  • Powermax125

Similar Parts

420152
SHIELD:DURAMAX HYAMP FINECUT

420151
NOZZLE:DURAMAX HYAMP FINECUT

228719
KIT:DURAMAX/DURAMAX HYAMP/RT HAND TORCH CAP SENSOR SWITCH

228720
KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH

420158
NOZZLE:DURAMAX HYAMP 45A CUT, order in qtys of 5

420156
CAP:DURAMAX HYAMP OHMIC

420168
SHIELD:DURAMAX HYAMP 45A/65A MECHANIZED

420169
NOZZLE:DURAMAX HYAMP 65A CUT

428162
KIT:DURAMAX HYAMP HAND TORCH TRIGGGER START SWITCH REPLACEMENT

428278
KIT:DURAMAX HYAMP LONG TORCH 45° FRONT REPLACEMENT