Hypertherm 420115 DEFLECTOR:DURAMAX LT

Product Description

The Hypertherm 420115 DEFLECTOR:DURAMAX LT is a genuine Hypertherm replacement part. This deflector is compatible with the Duramax LT plasma cutter. The deflector helps to protect the torch from damage and ensures that the plasma arc is properly directed.

Specifications

• Brand: Hypertherm
• Part number: 420115
• Description: DEFLECTOR:DURAMAX LT
• Compatibility: Duramax LT plasma cutter

Features

• Genuine Hypertherm replacement part
• Helps to protect the torch from damage
• Ensures that the plasma arc is properly directed

Installation

The Hypertherm 420115 DEFLECTOR:DURAMAX LT can be installed by following these steps:

1. Turn off the plasma cutter and allow it to cool down.
2. Remove the old deflector by unscrewing the two screws that hold it in place.
3. Position the new deflector over the torch and align the screw holes.
4. Insert the two screws and tighten them until the deflector is securely in place.

Maintenance

The Hypertherm 420115 DEFLECTOR:DURAMAX LT should be inspected regularly for wear and tear. If the deflector is damaged, it should be replaced immediately to prevent damage to the torch.

Troubleshooting

If you are experiencing problems with your Duramax LT plasma cutter, the deflector may be the cause. Check the deflector for damage and replace it if necessary. If the problem persists, contact Hypertherm customer support for assistance.

Conclusion

The Hypertherm 420115 DEFLECTOR:DURAMAX LT is an important part of the Duramax LT plasma cutter. This deflector helps to protect the torch from damage and ensures that the plasma arc is properly directed. By following the installation and maintenance instructions, you can help to ensure that your Duramax LT plasma cutter is operating properly.