Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE

Product Description

The Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE is a replacement part for the Hypertherm Edge Pro AC plasma cutting system. This kit includes the following components:

• 1 x Hypertherm 228464 Harness
• 1 x Hypertherm 228465 AC Input Module

The Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE is a critical component of the Hypertherm Edge Pro AC plasma cutting system. This kit ensures that the plasma cutting system is able to operate properly and efficiently.

Specifications

• Brand: Hypertherm
• Part number: 228464
• Part description: KIT:HARNNESS EDGE PRO AC INPUT MODULE
• Weight: 1 pound
• Dimensions: 6 x 4 x 2 inches

Compatibility

The Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE is compatible with the following Hypertherm plasma cutting systems:

• Hypertherm Edge Pro AC100
• Hypertherm Edge Pro AC200
• Hypertherm Edge Pro AC300

Installation

The Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE should be installed by a qualified technician. The installation process is as follows:

1. Disconnect the power supply from the plasma cutting system.
2. Remove the old harness and AC input module.
3. Install the new harness and AC input module.
4. Reconnect the power supply to the plasma cutting system.
5. Test the plasma cutting system to ensure that it is operating properly.

Troubleshooting

If the Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE is not working properly, there are a few troubleshooting steps that can be taken:

1. Check the connections between the harness and the AC input module.
2. Check the power supply to the plasma cutting system.
3. Check the fuses in the plasma cutting system.
4. If the problem persists, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 228464 KIT:HARNNESS EDGE PRO AC INPUT MODULE is a critical component of the Hypertherm Edge Pro AC plasma cutting system. This kit ensures that the plasma cutting system is able to operate properly and efficiently.

Similar Parts

228465
KIT:HARNNESS EDGE PRO POWER SWITCH

428305
KIT:EDGE PRO/MICROEDGE PRO SERCOS PCI SLOT

229727
HARNESS:EDGE CONNECT INPUT/OUTPUT

229821
FAN SUBASSEMBLY:XPR 292 CUBIC FEET PER MINUTE RATING 48 VOLTS DIRECT CURRENT POWER INPUT

229214
TB1 INPUT-POWER SUBASSEMBLY:600V 300A NON-GROUNDING BLOCK

141371
PRINTED CIRCUIT BOARD ASSEMBLY:XPR INPUT/OUTPUT

229213
INPUT/OUTPUT PANEL SUBASSEMBLY:9427 HPR 4-CHOPPERS

428007
KIT:FAN EDGE PRO TI EXTERNAL COOLING

428046
KIT:EDGE PRO TI EMERGENCY STOP CONNECTOR

428047
KIT:EDGE PRO TI 24VDC CONNECTOR