Hypertherm 228189 Motor Encoder Lifter Brake

Description

The Hypertherm 228189 Motor Encoder Lifter Brake is a replacement part for Hypertherm plasma cutters. This part is responsible for lifting the motor encoder and applying the brake.

Specifications

• Brand: Hypertherm
• Part number: 228189
• Part description: Motor Encoder Lifter Brake
• Weight: 0.5 pounds
• Dimensions: 3 x 2 x 1 inches

Installation

To install the Hypertherm 228189 Motor Encoder Lifter Brake, follow these steps:

1. Disconnect the power from the plasma cutter.
2. Remove the old motor encoder lifter brake.
3. Install the new motor encoder lifter brake.
4. Reconnect the power to the plasma cutter.

Troubleshooting

If the Hypertherm 228189 Motor Encoder Lifter Brake is not working properly, check the following:

• Make sure that the part is installed correctly.
• Check the connections to the part.
• If the part is still not working, contact Hypertherm customer support.

Conclusion

The Hypertherm 228189 Motor Encoder Lifter Brake is an important part of the plasma cutting system. By following these steps, you can ensure that this part is installed and working properly.

Similar Parts

123973
CABLE:LIFTER MOTOR/BRAKE POWER 10.06 m 33 ft

123972
CABLE:LIFTER MOTOR/BRAKE POWER 7.62 m 25 ft

223387
CABLE:LIFTER MOTOR/BRAKE POWER 22.86 m 75 ft

223348
CABLE:LIFTER MOTOR/BRAKE POWER 10.66 m 35 ft

223051
CABLE:LIFTER MOTOR/BRAKE POWER 3.2 m 10 ft

223347
CABLE:LIFTER MOTOR/BRAKE POWER 6.08 m 20 ft

123974
CABLE:LIFTER MOTOR/BRAKE POWER 10.97 m 36 ft

031148
MOTOR:24VDC 4000 RPM NEMA 23 WITH BRAKE/ENDCODER

228254
Motor/Encoder Assy w/ 50 ft cable

CABL-0057
100W/00W Motor Encoder Cables 10M