Hypertherm 123973 Cable
Part Description
CABLE:LIFTER MOTOR/BRAKE POWER 10.06 m (33 ft)
Compatibility
This cable is compatible with the following Hypertherm plasma cutters:
- Powermax30 XP
- Powermax45 XP
- Powermax65 XP
- Powermax85 XP
- Powermax105 XP
- Powermax125 XP
Specifications
- Length: 10.06 m (33 ft)
- Wire Gauge: 14 AWG
- Number of Conductors: 4
- Insulation: PVC
- Jacket: PVC
Installation
To install this cable, follow these steps:
- Disconnect the power source from the plasma cutter.
- Remove the old cable from the plasma cutter and the lifter motor/brake.
- Connect the new cable to the plasma cutter and the lifter motor/brake.
- Reconnect the power source to the plasma cutter.
Troubleshooting
If you are experiencing problems with this cable, check the following:
- Make sure that the cable is properly connected to the plasma cutter and the lifter motor/brake.
- Check the cable for any damage.
- If the cable is damaged, replace it with a new one.
Ordering Information
To order this cable, contact your local Hypertherm dealer.
Similar Parts
123974
CABLE:LIFTER MOTOR/BRAKE POWER 10.97 m 36 ft
123972
CABLE:LIFTER MOTOR/BRAKE POWER 7.62 m 25 ft
223387
CABLE:LIFTER MOTOR/BRAKE POWER 22.86 m 75 ft
223348
CABLE:LIFTER MOTOR/BRAKE POWER 10.66 m 35 ft
223051
CABLE:LIFTER MOTOR/BRAKE POWER 3.2 m 10 ft
223347
CABLE:LIFTER MOTOR/BRAKE POWER 6.08 m 20 ft
228189
Motor Encoder Lifter Brake
123902
CABLE:LIFTER MOT/BRAKE PWR 15.25 m 50 ft
031148
MOTOR:24VDC 4000 RPM NEMA 23 WITH BRAKE/ENDCODER
027550
Brake for Command THC Lifter