Hypertherm 123974 Cable

Part Description

CABLE:LIFTER MOTOR/BRAKE POWER 10.97 M 36 FT

Compatibility

This cable is compatible with the following Hypertherm systems:

• Powermax45XP
• Powermax65
• Powermax85
• Powermax105
• Powermax125

Specifications

• Length: 10.97 m (36 ft)
• Wire gauge: 14 AWG
• Number of conductors: 4
• Connector type: M12

Installation

1. Disconnect the power supply from the Hypertherm system.
2. Remove the old cable from the Hypertherm system.
3. Connect the new cable to the Hypertherm system.
4. Reconnect the power supply to the Hypertherm system.

Troubleshooting

If you are experiencing problems with the Hypertherm 123974 cable, please try the following troubleshooting steps:

1. Check the connections between the cable and the Hypertherm system.
2. Check the cable for any damage.
3. Replace the cable if it is damaged.

If you are still experiencing problems, please contact Hypertherm technical support for assistance.

Similar Parts

123973
CABLE:LIFTER MOTOR/BRAKE POWER 10.06 m 33 ft

123972
CABLE:LIFTER MOTOR/BRAKE POWER 7.62 m 25 ft

223387
CABLE:LIFTER MOTOR/BRAKE POWER 22.86 m 75 ft

223348
CABLE:LIFTER MOTOR/BRAKE POWER 10.66 m 35 ft

223051
CABLE:LIFTER MOTOR/BRAKE POWER 3.2 m 10 ft

223347
CABLE:LIFTER MOTOR/BRAKE POWER 6.08 m 20 ft

228189
Motor Encoder Lifter Brake

123902
CABLE:LIFTER MOT/BRAKE PWR 15.25 m 50 ft

031148
MOTOR:24VDC 4000 RPM NEMA 23 WITH BRAKE/ENDCODER

027550
Brake for Command THC Lifter