Hypertherm 128727 Motor/Encoder Assembly

Product Description

The Hypertherm 128727 Motor/Encoder Assembly is a replacement part for all Command THC lifters. This assembly includes the motor, encoder, and mounting hardware. The motor is a 12 VDC, 2.5 A motor with a 6 mm shaft. The encoder is a 500 PPR incremental encoder.

Specifications

• Brand: Hypertherm
• Part number: 128727
• Part description: Motor/Encoder Assembly for all Command THC lifters
• Motor: 12 VDC, 2.5 A, 6 mm shaft
• Encoder: 500 PPR incremental

Installation

To install the motor/encoder assembly, follow these steps:

1. Disconnect the power from the lifter.
2. Remove the four screws that hold the motor/encoder assembly in place.
3. Remove the old motor/encoder assembly.
4. Install the new motor/encoder assembly.
5. Replace the four screws that hold the motor/encoder assembly in place.
6. Reconnect the power to the lifter.

Troubleshooting

If the motor/encoder assembly is not working properly, check the following:

• The power connection to the lifter.
• The motor/encoder assembly for damage.
• The encoder cable for damage.
• The encoder settings in the lifter.

If you are still having problems, contact Hypertherm technical support for assistance.

Warranty

The Hypertherm 128727 Motor/Encoder Assembly has a one-year warranty.

Similar Parts

128726
Encoder for X-4 Lifter Assy. Command THC

851380
KIT-CONSUMABLE:POWERMAX125 MECH ALL-IN-ONE - ENGLISH

041511
PCB Assy: Command THC Motor drive

123020
Motor Drive Cable for Command THC, 25 ft.

123021
Motor Drive Cables, 50 ft. command thc system

123199
Motor Drive Cable, 15 ft. Command THC system

123205
Motor Drive Cable for Command THC, 75 feet

228254
Motor/Encoder Assy w/ 50 ft cable

CABL-0057
100W/00W Motor Encoder Cables 10M

228189
Motor Encoder Lifter Brake