Hypertherm 027550 Brake for Command THC Lifter

Product Description

The Hypertherm 027550 Brake for Command THC Lifter is a replacement part for the Hypertherm Command THC lifter. This brake helps to control the speed of the lifter and prevents it from overshooting its target position. The brake is made of durable materials and is designed to withstand the harsh conditions of plasma cutting.

Features

• Replacement part for the Hypertherm Command THC lifter
• Helps to control the speed of the lifter
• Prevents the lifter from overshooting its target position
• Made of durable materials
• Designed to withstand the harsh conditions of plasma cutting

Specifications

• Part number: 027550
• Brand: Hypertherm
• Weight: 0.5 lbs
• Dimensions: 2.5" x 2.5" x 1"

Installation

The Hypertherm 027550 Brake for Command THC Lifter can be installed by a qualified technician. The following steps should be followed:

1. Disconnect the power to the plasma cutter.
2. Remove the old brake from the lifter.
3. Install the new brake on the lifter.
4. Reconnect the power to the plasma cutter.

Troubleshooting

If the brake is not working properly, the following troubleshooting steps can be taken:

1. Check the connections between the brake and the lifter.
2. Check the brake for damage.
3. Replace the brake if it is damaged.

Ordering Information

The Hypertherm 027550 Brake for Command THC Lifter can be ordered from Hypertherm or from an authorized Hypertherm dealer.