Hypertherm 120727 Nozzle Shield Assembly

Part Description

The Hypertherm 120727 nozzle shield assembly is a replacement part for Hypertherm plasma cutters. It is made of durable materials that can withstand the high temperatures and pressures generated by the plasma cutting process. The nozzle shield assembly helps to protect the nozzle from damage and ensures that the plasma arc is properly formed.

Specifications

• Brand: Hypertherm
• Part Number: 120727
• Description: Nozzle Shield Assembly
• Material: Copper
• Dimensions: 1.5" diameter x 2.5" length
• Weight: 0.5 lbs

Compatibility

The Hypertherm 120727 nozzle shield assembly is compatible with the following Hypertherm plasma cutters:

• Powermax30XP
• Powermax45XP
• Powermax65XP
• Powermax85XP
• Powermax105XP
• Powermax125XP

Installation

To install the Hypertherm 120727 nozzle shield assembly, follow these steps:

1. Turn off the plasma cutter and allow it to cool down.
2. Remove the old nozzle shield assembly by unscrewing it from the plasma torch.
3. Screw the new nozzle shield assembly onto the plasma torch.
4. Tighten the nozzle shield assembly until it is snug.
5. Turn on the plasma cutter and test the new nozzle shield assembly.

Troubleshooting

If you are experiencing problems with the Hypertherm 120727 nozzle shield assembly, check the following:

• Make sure that the nozzle shield assembly is properly installed.
• Check the nozzle shield assembly for damage.
• Replace the nozzle shield assembly if it is damaged.

If you are still experiencing problems, contact Hypertherm customer support for assistance.

Conclusion

The Hypertherm 120727 nozzle shield assembly is a critical part of the plasma cutting process. It helps to protect the nozzle from damage and ensures that the plasma arc is properly formed. By following the installation and troubleshooting tips in this document, you can ensure that your Hypertherm plasma cutter is operating properly.