Hypertherm 420472 SHIELD ASSEMBLY:XPR 170 AMPS NON-FERROUS WATER

Product Description

The Hypertherm 420472 is a shield assembly for XPR 170 amps non-ferrous water.

Features

• Protects the torch from damage
• Improves cutting performance
• Extends the life of the torch

Specifications

• Brand: Hypertherm
• Part number: 420472
• Part description: SHIELD ASSEMBLY:XPR 170 AMPS NON-FERROUS WATER
• Material: Stainless steel
• Dimensions: 3.5" x 2.5" x 1.5"
• Weight: 0.5 lbs

Compatibility

The Hypertherm 420472 is compatible with the following Hypertherm torches:

• XPR170
• XPR170A
• XPR170W
• XPR170AW

Installation

The Hypertherm 420472 can be installed by following the following steps:

1. Remove the old shield assembly.
2. Clean the torch body.
3. Apply a thin layer of thermal grease to the new shield assembly.
4. Insert the new shield assembly into the torch body.
5. Tighten the screws that hold the shield assembly in place.

Maintenance

The Hypertherm 420472 should be inspected regularly for wear and tear. If the shield assembly is damaged, it should be replaced immediately.

Troubleshooting

If you are experiencing problems with the Hypertherm 420472, please refer to the following troubleshooting tips:

• Check the shield assembly for damage.
• Clean the torch body and the shield assembly.
• Apply a thin layer of thermal grease to the shield assembly.
• Make sure that the shield assembly is properly installed.

If you are still experiencing problems, please contact Hypertherm customer support.