Hypertherm 011114 Filter/Regulator

Part Description

The Hypertherm 011114 filter/regulator is a 1/4" auto-drain regulator with a gauge. It has a maximum inlet pressure of 150 PSI and a maximum outlet pressure of 125 PSI. The filter/regulator is designed to remove contaminants from the air supply and to maintain a consistent outlet pressure.

Features

• 1/4" auto-drain regulator
• Maximum inlet pressure of 150 PSI
• Maximum outlet pressure of 125 PSI
• Gauge for monitoring outlet pressure
• Removes contaminants from the air supply
• Maintains a consistent outlet pressure

Applications

The Hypertherm 011114 filter/regulator is ideal for use in a variety of applications, including:

• Plasma cutting
• Laser cutting
• Welding
• Painting
• Sandblasting

Installation

The Hypertherm 011114 filter/regulator can be installed in a variety of ways. The following are the recommended installation steps:

1. Choose a location for the filter/regulator that is close to the air supply and the equipment that it will be used with.
2. Mount the filter/regulator to a wall or other sturdy surface.
3. Connect the air supply to the filter/regulator's inlet port.
4. Connect the equipment that will be used with the filter/regulator to the filter/regulator's outlet port.
5. Turn on the air supply and adjust the outlet pressure to the desired setting.

Maintenance

The Hypertherm 011114 filter/regulator requires minimal maintenance. The following are the recommended maintenance tasks:

• Check the filter/regulator for leaks on a regular basis.
• Clean the filter/regulator's filter element on a regular basis.
• Replace the filter/regulator's filter element when it becomes dirty or damaged.

Troubleshooting

If the Hypertherm 011114 filter/regulator is not functioning properly, the following troubleshooting steps can be performed:

• Check the air supply to make sure that it is turned on and that there is sufficient pressure.
• Check the filter/regulator's filter element to make sure that it is clean and not damaged.
• Check the filter/regulator's outlet pressure to make sure that it is set to the desired setting.
• If the filter/regulator is still not functioning properly, contact Hypertherm for assistance.

Conclusion

The Hypertherm 011114 filter/regulator is a reliable and versatile product that can be used in a variety of applications. It is easy to install and maintain, and it requires minimal maintenance. If you are looking for a filter/regulator that will provide you with clean, dry air, the Hypertherm 011114 is a great option.