Hypertherm 011109 Filter Housing
Part Description
Filter Housing: 1/4 NPT AUTO DRAIN AF20
Brand
Hypertherm
Part Number
011109
Features
- 1/4 NPT auto drain
- AF20 filter element
- Maximum operating pressure of 250 psi
- Maximum operating temperature of 125°F
Applications
- Plasma cutting
- Laser cutting
- Waterjet cutting
- Other industrial applications
Installation
- Turn off the power supply to the plasma cutter.
- Disconnect the air supply line from the plasma cutter.
- Remove the old filter housing from the plasma cutter.
- Install the new filter housing on the plasma cutter.
- Reconnect the air supply line to the plasma cutter.
- Turn on the power supply to the plasma cutter.
Maintenance
- Replace the filter element every 6 months or 1000 hours of use, whichever comes first.
- Clean the filter housing with a mild detergent and water.
- Inspect the filter housing for damage and replace it if necessary.
Troubleshooting
- If the plasma cutter is not cutting properly, check the filter housing to make sure it is not clogged.
- If the plasma cutter is making a loud noise, check the filter housing to make sure it is not damaged.
Warranty
Hypertherm offers a 1-year warranty on the 011109 filter housing.
Similar Parts
011144
FILTER:1/4 NPT AUTO DRAIN AF20-A 011109
011091
FLTR:1/4 NPT AUTO DRAIN
027139
Filter Housing 10' x 3/8 NPT
011114
Filter/regulator:7-125 PSI 1/4 auto drain w gauge
006099
Bib drain valve 1/4 NPT x 3/8 hose
428038
KIT:MAXPRO200 FILTER HOUSING REPLACEMENT
027634
Coolant filter housing
011025
Filter/Regulator, 0-120 PSI, 1/4 NPT Air
208065
RECEPTACLE HOUSING:8-POSITION SINGLE ROW STRAIGHT 24-12AWG WIRE RANGE SPRING CAGE 5.08MM...
011093
PowerMax 1250 Replacement Filter Element for STD Filter