Hypertherm 428351 KIT:PMX65/85/105/125 FILTER SUB-ASSEMBLY W/CLEAR BOWL

Product Description

The Hypertherm 428351 KIT:PMX65/85/105/125 FILTER SUB-ASSEMBLY W/CLEAR BOWL is a replacement part for Hypertherm plasma cutting systems. This kit includes the following components:

• 1x Filter Sub-Assembly
• 1x Clear Bowl
• 1x Gasket
• 1x O-Ring

Specifications

• Brand: Hypertherm
• Part Number: 428351
• Description: KIT:PMX65/85/105/125 FILTER SUB-ASSEMBLY W/CLEAR BOWL
• Weight: 0.5 lbs
• Dimensions: 6" x 4" x 3"

Compatibility

This kit is compatible with the following Hypertherm plasma cutting systems:

• Powermax65
• Powermax85
• Powermax105
• Powermax125

Installation

To install this kit, follow these steps:

1. Turn off the power to the plasma cutting system.
2. Disconnect the air supply hose from the plasma cutting system.
3. Remove the old filter sub-assembly from the plasma cutting system.
4. Install the new filter sub-assembly into the plasma cutting system.
5. Reconnect the air supply hose to the plasma cutting system.
6. Turn on the power to the plasma cutting system.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, here are some troubleshooting tips:

• Check the filter sub-assembly for clogs or debris.
• Clean the filter sub-assembly with a mild detergent and water.
• Replace the filter sub-assembly if it is damaged or worn.
• Check the air supply hose for leaks or kinks.
• Make sure the plasma cutting system is properly grounded.
• Contact Hypertherm customer service for further assistance.

Warranty

This kit is covered by a 1-year warranty against defects in materials and workmanship.