Hypertherm 006032 Solenoid Valve

Part Description

The Hypertherm 006032 solenoid valve is a 150# 1/4 FPT 120V NC valve. It is used to control the flow of fluid in a variety of applications, including water, air, and oil. The valve is made of brass and has a Buna-N seal. It is rated for a maximum pressure of 150 psi and a maximum temperature of 180°F.

Features

• 150# 1/4 FPT 120V NC valve
• Controls the flow of fluid in a variety of applications
• Made of brass with a Buna-N seal
• Rated for a maximum pressure of 150 psi and a maximum temperature of 180°F

Applications

• Water
• Air
• Oil

Installation

The Hypertherm 006032 solenoid valve can be installed in any position. However, it is recommended that the valve be installed in a vertical position with the solenoid coil pointing up. This will help to prevent the accumulation of debris in the valve.

The valve should be connected to the fluid supply and the fluid outlet using 1/4" NPT fittings. The valve should be wired according to the wiring diagram provided with the valve.

Maintenance

The Hypertherm 006032 solenoid valve requires very little maintenance. However, it is important to inspect the valve regularly for signs of wear or damage. The valve should also be cleaned periodically to remove any debris that may have accumulated.

Troubleshooting

If the Hypertherm 006032 solenoid valve is not working properly, there are a few things that you can check:

• Check the power supply to the valve.
• Check the wiring connections to the valve.
• Check the valve for signs of wear or damage.
• Clean the valve to remove any debris that may have accumulated.

If you have checked all of these things and the valve is still not working properly, you may need to replace the valve.

Conclusion

The Hypertherm 006032 solenoid valve is a reliable and versatile valve that can be used in a variety of applications. The valve is easy to install and maintain, and it requires very little maintenance.