Hypertherm 006014 Solenoid Valve

Part Description

The Hypertherm 006014 solenoid valve is a 90# 1/4 FPT 120V NC valve. It is used to control the flow of gas or liquid in a variety of applications. The valve is made of brass and has a Buna-N seal. It is rated for a maximum pressure of 150 psi and a maximum temperature of 180°F.

Features

• 90# 1/4 FPT
• 120V NC
• Brass construction
• Buna-N seal
• Maximum pressure of 150 psi
• Maximum temperature of 180°F

Applications

The Hypertherm 006014 solenoid valve is used in a variety of applications, including:

• Gas and liquid flow control
• Irrigation systems
• Pneumatic systems
• Hydraulic systems

Installation

The Hypertherm 006014 solenoid valve can be installed in any position. It is important to make sure that the valve is installed in a location where it will not be exposed to excessive heat or vibration. The valve should also be installed in a location where it is easily accessible for maintenance.

To install the valve, follow these steps:

1. Turn off the power supply to the valve.
2. Disconnect the existing piping from the valve.
3. Install the new valve in the desired location.
4. Reconnect the piping to the valve.
5. Turn on the power supply to the valve.

Maintenance

The Hypertherm 006014 solenoid valve requires very little maintenance. The valve should be inspected periodically for leaks and damage. The valve should also be cleaned periodically to remove any dirt or debris that may have accumulated.

To clean the valve, follow these steps:

1. Turn off the power supply to the valve.
2. Disconnect the existing piping from the valve.
3. Remove the valve from the system.
4. Disassemble the valve.
5. Clean the valve parts with a mild detergent and water.
6. Reassemble the valve.
7. Reinstall the valve in the system.
8. Reconnect the piping to the valve.
9. Turn on the power supply to the valve.