Hypertherm 128087 Chopper Retrofit Kit for HT 40C

Overview

The Hypertherm 128087 Chopper Retrofit Kit is a replacement part for the HT 40C plasma cutter. This kit includes all of the necessary parts to upgrade the HT 40C's chopper assembly to the latest design. The new chopper assembly is more reliable and efficient than the original design, and it will help to extend the life of your HT 40C.

Kit Contents

The 128087 Chopper Retrofit Kit includes the following parts:

• Chopper assembly
• Mounting hardware
• Instructions

Installation

The 128087 Chopper Retrofit Kit can be installed in about 30 minutes. The following steps will guide you through the installation process:

1. Turn off the power to the HT 40C.
2. Remove the side panel from the HT 40C.
3. Locate the chopper assembly. It is located on the left side of the unit, near the front.
4. Remove the four screws that hold the chopper assembly in place.
5. Remove the old chopper assembly.
6. Install the new chopper assembly.
7. Replace the four screws that hold the chopper assembly in place.
8. Replace the side panel on the HT 40C.
9. Turn on the power to the HT 40C.

Benefits of the Chopper Retrofit Kit

The 128087 Chopper Retrofit Kit offers a number of benefits, including:

• Increased reliability: The new chopper assembly is more reliable than the original design, and it will help to extend the life of your HT 40C.
• Improved efficiency: The new chopper assembly is more efficient than the original design, and it will help to reduce your operating costs.
• Increased power: The new chopper assembly provides more power to the HT 40C, which will allow you to cut thicker materials more easily.

Conclusion

The Hypertherm 128087 Chopper Retrofit Kit is a valuable upgrade for any HT 40C plasma cutter. This kit will help to improve the reliability, efficiency, and power of your HT 40C, and it will help to extend the life of your unit.