Hypertherm 420368 Water Tube Assembly for XPR Plasma Cutters

Product Description

The Hypertherm 420368 Water Tube Assembly is a genuine OEM replacement part for XPR plasma cutters. This assembly includes the water tube, fittings, and O-rings necessary to connect the plasma cutter to a water supply. The water tube is made of durable copper and is designed to withstand the high temperatures and pressures generated by the plasma cutting process. The fittings are made of brass and are corrosion-resistant. The O-rings are made of a high-quality Buna-N material that is resistant to oil, water, and heat.

Features

• Genuine OEM Hypertherm replacement part
• Includes water tube, fittings, and O-rings
• Copper water tube is durable and withstands high temperatures and pressures
• Brass fittings are corrosion-resistant
• Buna-N O-rings are resistant to oil, water, and heat

Compatibility

The Hypertherm 420368 Water Tube Assembly is compatible with the following XPR plasma cutters:

• XPR170
• XPR300
• XPR400
• XPR600
• XPR800
• XPR1000

Installation

The Hypertherm 420368 Water Tube Assembly can be installed by following these steps:

1. Disconnect the power supply from the plasma cutter.
2. Turn off the water supply.
3. Disconnect the water hose from the plasma cutter.
4. Remove the old water tube assembly from the plasma cutter.
5. Install the new water tube assembly into the plasma cutter.
6. Tighten the fittings until they are snug.
7. Reconnect the water hose to the plasma cutter.
8. Turn on the water supply.
9. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 420368 Water Tube Assembly, you can troubleshoot the issue by following these steps:

1. Check the water supply to make sure it is turned on and that there is sufficient water pressure.
2. Check the water hose to make sure it is not kinked or damaged.
3. Check the fittings to make sure they are tight.
4. Check the O-rings to make sure they are not damaged or worn.
5. If you are still experiencing problems, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 420368 Water Tube Assembly is a critical component of your XPR plasma cutter. By following the installation and troubleshooting steps outlined in this document, you can ensure that your plasma cutter is operating properly and efficiently.