Hypertherm 020963 Water Tube for Pac 200/2000 Torch Head

Product Description

The Hypertherm 020963 water tube is a genuine replacement part for the Pac 200 and Pac 2000 torch heads. This water tube is responsible for cooling the torch head and preventing it from overheating. It is made of a durable material that can withstand the high temperatures generated by the plasma cutting process.

Specifications

• Brand: Hypertherm
• Part Number: 020963
• Part Description: Water tube for Pac 200/2000 torch head
• Material: Copper
• Length: 12 inches
• Outside Diameter: 1/4 inch
• Inside Diameter: 3/16 inch

Installation

To install the Hypertherm 020963 water tube, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the torch head from the plasma cutter.
3. Unscrew the old water tube from the torch head.
4. Screw the new water tube into the torch head.
5. Reattach the torch head to the plasma cutter.
6. Reconnect the power supply to the plasma cutter.

Safety Precautions

When working with the Hypertherm 020963 water tube, be sure to follow these safety precautions:

• Always wear safety glasses when working with plasma cutting equipment.
• Do not touch the water tube while the plasma cutter is in operation.
• Allow the water tube to cool down before handling it.
• Never use a damaged or leaking water tube.

Troubleshooting

If you are experiencing problems with the Hypertherm 020963 water tube, here are some troubleshooting tips:

• Check the water tube for leaks. If you find a leak, replace the water tube.
• Make sure the water tube is properly installed. The water tube should be screwed into the torch head tightly.
• Check the water flow. The water flow should be strong and steady. If the water flow is weak or intermittent, check the water supply and the water filter.

If you are still experiencing problems with the Hypertherm 020963 water tube, contact Hypertherm customer support for assistance.