Hypertherm 220571 WATER TUBE ASSY:HPR BEVEL

Product Description

The Hypertherm 220571 WATER TUBE ASSY:HPR BEVEL is a genuine Hypertherm replacement part for HPR plasma cutting systems. This water tube assembly is designed to provide cooling for the plasma torch and to protect the torch from overheating. The assembly includes the water tube, fittings, and clamps required for installation.

Features

• Genuine Hypertherm replacement part
• Designed for use with HPR plasma cutting systems
• Cools the plasma torch and protects it from overheating
• Includes water tube, fittings, and clamps

Specifications

• Part number: 220571
• Brand: Hypertherm
• Weight: 1.5 lbs
• Dimensions: 12" x 8" x 4"

Installation

1. Turn off the power to the plasma cutting system.
2. Disconnect the water supply line from the plasma torch.
3. Remove the old water tube assembly from the plasma torch.
4. Install the new water tube assembly onto the plasma torch.
5. Reconnect the water supply line to the plasma torch.
6. Turn on the power to the plasma cutting system.

Troubleshooting

If the plasma torch is overheating, the water tube assembly may be clogged or damaged. To troubleshoot the problem, follow these steps:

1. Inspect the water tube assembly for any signs of damage.
2. If the water tube assembly is damaged, replace it with a new one.
3. If the water tube assembly is not damaged, check the water supply line for any kinks or obstructions.
4. If the water supply line is kinked or obstructed, clear the obstruction and reconnect the water supply line to the plasma torch.
5. If the problem persists, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 220571 WATER TUBE ASSY:HPR BEVEL is a critical component of the HPR plasma cutting system. This assembly provides cooling for the plasma torch and protects it from overheating. By following the installation and troubleshooting steps outlined in this document, you can ensure that your plasma cutting system is operating properly and safely.