Hypertherm 420260 SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR

Product Description

The Hypertherm 420260 SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR is a genuine Hypertherm replacement part. This swirl ring is designed for use with the Hypertherm XPR170 plasma cutting system. It is made of durable materials and is built to last. This swirl ring is essential for maintaining the performance of your Hypertherm plasma cutting system.

Features

• Genuine Hypertherm replacement part
• Designed for use with the Hypertherm XPR170 plasma cutting system
• Made of durable materials
• Built to last

Specifications

• Part number: 420260
• Description: SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR
• Brand: Hypertherm

Compatibility

This swirl ring is compatible with the following Hypertherm plasma cutting systems:

• XPR170

Installation

To install this swirl ring, follow these steps:

1. Turn off the power to the plasma cutting system.
2. Remove the old swirl ring.
3. Install the new swirl ring.
4. Tighten the screws that hold the swirl ring in place.
5. Turn on the power to the plasma cutting system.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, the swirl ring may be the cause. Here are some troubleshooting tips:

• Check the swirl ring for damage. If the swirl ring is damaged, it will need to be replaced.
• Make sure the swirl ring is installed correctly. If the swirl ring is not installed correctly, it will not function properly.
• Clean the swirl ring. If the swirl ring is dirty, it can cause problems with the plasma cutting system.

If you are still experiencing problems with your Hypertherm plasma cutting system, contact a qualified technician for assistance.

Conclusion

The Hypertherm 420260 SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR is an essential part of the Hypertherm XPR170 plasma cutting system. This swirl ring is made of durable materials and is built to last. It is easy to install and can be replaced in a matter of minutes. If you are experiencing problems with your Hypertherm plasma cutting system, the swirl ring may be the cause. By following the troubleshooting tips in this document, you can quickly and easily resolve the problem.

Similar Parts

420513
SHIELD ASSEMBLY:XPR 170 AMPS MILD STEEL/170 AMPS AL AIR

420258
ELECTRODE:XPR 170 AMPS MILD STEELS/170A ALUMINUM AIR

420524
NOZZLE:XPR 170 AMPS ALUMINUM AIR

420261
NOZZLE:XPR 170 AMPS MILD STEEL

420406
SWIRL RING:XPR 300 AMPS MILD STEEL

420242
SWIRL RING:XPR 80-130 AMPS MILD STEEL

420407
SWIRL RING:XPR 30 AMPS MILD STEEL

420294
ELECTRODE:XPR 40-80 AMPS ALUMINUM AIR

420273
SHIELD ASSEMBLY:XPR 220 AMPS MILD STEEL

420252
NOZZLE:XPR 130 AMPS MILD STEEL