Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL

Product Description

The Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL is a genuine Hypertherm replacement part. It is made from high-quality materials and is designed to provide long-lasting performance. This swirl ring is compatible with Hypertherm XPR 80 and 130 amp mild steel plasma cutting torches.

Features

• Genuine Hypertherm replacement part
• Made from high-quality materials
• Designed for long-lasting performance
• Compatible with Hypertherm XPR 80 and 130 amp mild steel plasma cutting torches

Specifications

• Part number: 420242
• Brand: Hypertherm
• Part description: SWIRL RING:XPR 80-130 AMPS MILD STEEL
• Material: Copper
• Dimensions: 1.5" OD x 0.75" ID x 0.25" H
• Weight: 0.5 oz

Installation

To install the Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL, follow these steps:

1. Turn off the power to the plasma cutting torch.
2. Remove the old swirl ring from the torch.
3. Clean the torch body and the new swirl ring with a solvent.
4. Apply a small amount of anti-seize compound to the new swirl ring.
5. Thread the new swirl ring onto the torch body.
6. Tighten the swirl ring until it is snug.
7. Turn on the power to the plasma cutting torch.

Maintenance

To maintain the Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL, follow these steps:

• Inspect the swirl ring for wear and damage before each use.
• Clean the swirl ring with a solvent after each use.
• Replace the swirl ring if it is worn or damaged.

Troubleshooting

If the Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL is not functioning properly, follow these steps:

1. Check the swirl ring for wear and damage.
2. Clean the swirl ring with a solvent.
3. Replace the swirl ring if it is worn or damaged.
4. If the problem persists, contact Hypertherm technical support.

Warranty

The Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL is backed by a 1-year warranty. For more information, please see the Hypertherm warranty policy.

Conclusion

The Hypertherm 420242 SWIRL RING:XPR 80-130 AMPS MILD STEEL is a genuine Hypertherm replacement part that is made from high-quality materials and is designed to provide long-lasting performance. This swirl ring is compatible with Hypertherm XPR 80 and 130 amp mild steel plasma cutting torches.

Similar Parts

420260
SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR

420406
SWIRL RING:XPR 300 AMPS MILD STEEL

420407
SWIRL RING:XPR 30 AMPS MILD STEEL

420249
ELECTRODE:XPR 130 AMPS MILD STEEL

450252
NOZZLE:XPR 130 AMPS MILD STEEL

420252
NOZZLE:XPR 130 AMPS MILD STEEL

420255
SHIELD ASSEMBLY:XPR 130 AMPS MILD STEEL

420513
SHIELD ASSEMBLY:XPR 170 AMPS MILD STEEL/170 AMPS AL AIR

420273
SHIELD ASSEMBLY:XPR 220 AMPS MILD STEEL

420261
NOZZLE:XPR 170 AMPS MILD STEEL