Monthly Basis
What's happening this month?

Hypertherm 420258 ELECTRODE:XPR 170 AMPS MILD STEELS/170A ALUMINUM AIR

Product Details

Features

Compatibility

The Hypertherm 420258 ELECTRODE:XPR 170 AMPS MILD STEELS/170A ALUMINUM AIR is compatible with the following Hypertherm plasma cutters:

Installation

To install the Hypertherm 420258 ELECTRODE:XPR 170 AMPS MILD STEELS/170A ALUMINUM AIR, follow these steps:

  1. Turn off the plasma cutter and disconnect the power cord.
  2. Remove the old electrode.
  3. Insert the new electrode into the torch.
  4. Tighten the electrode retainer.
  5. Reconnect the power cord and turn on the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 420258 ELECTRODE:XPR 170 AMPS MILD STEELS/170A ALUMINUM AIR, here are some troubleshooting tips:

If you are still experiencing problems, contact Hypertherm technical support for assistance.

Similar Parts

420260
SWIRL RING:XPR 170 AMPS MILD STEEL/170 AMPS ALUMINUM AIR

420513
SHIELD ASSEMBLY:XPR 170 AMPS MILD STEEL/170 AMPS AL AIR

420524
NOZZLE:XPR 170 AMPS ALUMINUM AIR

420294
ELECTRODE:XPR 40-80 AMPS ALUMINUM AIR

420261
NOZZLE:XPR 170 AMPS MILD STEEL

420323
SWIRL RING:XPR 60-80A SST AL/130-170A FUEL/300A SST

420327
SHIELD ASSEMBLY:XPR 170 AMPS NON-FERROUS

420472
SHIELD ASSEMBLY:XPR 170 AMPS NON-FERROUS WATER

420324
NOZZLE ASSEMBLY:XPR 170 AMPS NON-FERROUS

420240
ELECTRODE:XPR 80 AMPS MILD STEEL