Hypertherm 229822 FAN SUBASSEMBLY

Part Description

890 CUBIC FEET PER MINUTE 2950 REVOLUTIONS PER MINUTE 48 VOLTS DIRECT CU...

Specifications

• Brand: Hypertherm
• Part number: 229822

Features

• 890 Cubic Feet Per Minute
• 2950 Revolutions Per Minute
• 48 Volts Direct Current

Applications

• Hypertherm Powermax Plasma Cutters

Installation

1. Disconnect the power supply from the plasma cutter.
2. Remove the side panel from the plasma cutter.
3. Remove the old fan from the plasma cutter.
4. Install the new fan into the plasma cutter.
5. Replace the side panel on the plasma cutter.
6. Reconnect the power supply to the plasma cutter.

Similar Parts

229821
FAN SUBASSEMBLY:XPR 292 CUBIC FEET PER MINUTE RATING 48 VOLTS DIRECT CURRENT POWER INPUT

229721
SOLENOID VALVE SUBASSEMBLY:COOLANT 24 VOLTS DIRECT CURRENT

229741
FLOW METER SUBASSEMBLY:.5-5 GALLONS PER MINUTE ROTOR 1/4 INCH FEMALE NATIONAL PIPE THREA...

003277
RELAY:24 VOLTS DIRECT CURRENT COIL NORMALLY OPEN SILVER CONTACTS WITH MAGNETIC BLOWOUT B...

006155
SOLENOID VALVE:MANIFOLD 10MM 24 VOLTS DIRECT CURRENT 3-WAY

229671
POWER SOURCE:ALTERNATING CURRENT TO DIRECT CURRENT CONVERTER 100-240 VOLTS ALTERNATING C...

005119
FLOWSWITCH: 0.5 GALLONS PER MINUTE

429060
KIT:CONTACTOR SUBASSEMBLY:140 AMPS AC-3 INDUCTIVE LOAD RATED 3 POLES 120 VOLTS ALTERNAT...

229697
CONTACTOR SUBASSEMBLY:80 AMPS IEC AC-3 RATING 3-POLE 120 VOLTS ALTERNATING CURRENT COIL ...

229844
REGULATOR SUBASSEMBLY:WATER PRESET TO 35 POUNDS PER SQUARE INCH 1/4" NATIONAL PIPE THREA...