Hypertherm 223342 Cable

Part Description

CABLE:ENCODER/HALL 10.66 m 35 ft

Specifications

• Brand: Hypertherm
• Part Number: 223342
• Length: 10.66 m (35 ft)

Compatibility

This cable is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install this cable, follow these steps:

1. Disconnect the power cord from the plasma cutter.
2. Remove the old cable from the plasma cutter.
3. Connect the new cable to the plasma cutter.
4. Reconnect the power cord to the plasma cutter.

Similar Parts

123969
CABLE:ENCODER/HALL 7.62 m 25 ft

123970
CABLE:ENCODER/HALL 10.06 m 33 ft

123971
CABLE:ENCODER/HALL 10.97 m 36 ft

223049
CABLE:ENCODER/HALL 3.2 m 10 ft

223341
CABLE:ENCODER/HALL 6.08 m 20 ft

123899
CABLE:ENCODER/HALL 15.25 m 50 ft

Laser 04-2201:10207-01
Encoder Cable - 12m AKM 13 Feedback Cable

109483
CUR SNSR:HALL 200A 4V

109004
Current Sensor; HALL 100A=4V

228254
Motor/Encoder Assy w/ 50 ft cable