Hypertherm 220782 SWIRL RING

Part Description

SWIRL RING:9427 400A MS COUNTER-CLOCKWISE.

Compatibility

This swirl ring is compatible with Hypertherm 400A MS plasma cutters.

Specifications

• Brand: Hypertherm
• Part number: 220782
• Material: Copper
• Dimensions: 1.5" OD x 0.75" ID x 0.25" thick
• Weight: 0.5 oz

Installation

1. Remove the old swirl ring from the torch.
2. Clean the torch body and the swirl ring seat.
3. Apply a small amount of anti-seize compound to the new swirl ring.
4. Install the new swirl ring on the torch body.
5. Tighten the swirl ring until it is snug.

Troubleshooting

If your plasma cutter is not cutting properly, the swirl ring may be damaged or worn. Inspect the swirl ring for any signs of damage, such as cracks or burrs. If the swirl ring is damaged, replace it with a new one.

Safety Precautions

When working on your plasma cutter, always wear safety glasses and gloves. Be sure to disconnect the power supply before performing any maintenance or repairs.

Similar Parts

220783
CAP:HPR400 400A NOZZLE RETAINER MS COUNTER-CLOCKWISE

220794
CAP:HPR400 260A BEVEL NOZZLE RET MS COUNTER-CLOCKWISE

220553
Swirl Ring: HPR 50 amp clockwise

420358
SWIRL RING:XPR 300 AMPS NON-FERROUS FUEL CLOCKWISE

128239
KIT-O-RING:400A DRY QDISC TCH

220757
CAP:HPR400 200A NOZZLE RETAINER MS CLOCKWISE

220885
CAP:HPR 800A NOZZLE RET CLOCKWISE

C107-9100
Torch Head, Spirit 400a

C107-9000
Torch Base, Spirit 400a

C107-1000
Torch Kit, Spirit 400a