Hypertherm 128239 KIT-O-RING:400A DRY QDISC TCH

Product Description

The Hypertherm 128239 KIT-O-RING:400A DRY QDISC TCH is a replacement o-ring kit for Hypertherm plasma cutting torches. This kit includes four o-rings, two for the torch head and two for the torch body. The o-rings are made of a durable, high-temperature resistant material that will provide long-lasting performance.

Features

• Includes four o-rings, two for the torch head and two for the torch body
• Made of a durable, high-temperature resistant material
• Provides long-lasting performance

Compatibility

The Hypertherm 128239 KIT-O-RING:400A DRY QDISC TCH is compatible with the following Hypertherm plasma cutting torches:

• Powermax45XP
• Powermax65XP
• Powermax85XP
• Powermax105XP
• Powermax125XP

Installation

To install the Hypertherm 128239 KIT-O-RING:400A DRY QDISC TCH, follow these steps:

1. Turn off the power to the plasma cutting torch.
2. Remove the torch head from the torch body.
3. Remove the old o-rings from the torch head and torch body.
4. Install the new o-rings on the torch head and torch body.
5. Reattach the torch head to the torch body.
6. Turn on the power to the plasma cutting torch.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting torch, the o-rings may be worn or damaged. To troubleshoot the problem, follow these steps:

1. Inspect the o-rings for signs of wear or damage.
2. If the o-rings are worn or damaged, replace them with new o-rings.
3. If the problem persists, contact Hypertherm technical support for further assistance.