Hypertherm 220313 Inner Retaining Cap
Product Description
The Hypertherm 220313 Inner Retaining Cap is a genuine replacement part for Hypertherm plasma cutters. This cap is located on the inside of the torch and helps to retain the electrode. It is made of durable materials and is designed to withstand the high temperatures and pressures generated by the plasma cutting process.
Specifications
- Brand: Hypertherm
- Part number: 220313
- Part description: Inner Retaining Cap
- Material: Copper
- Dimensions: 0.75" OD x 0.375" ID x 0.25" H
Compatibility
The Hypertherm 220313 Inner Retaining Cap is compatible with the following Hypertherm plasma cutters:
- Powermax30 XP
- Powermax45 XP
- Powermax65 XP
- Powermax85 XP
- Powermax105 XP
- Powermax125 XP
Installation
To install the Hypertherm 220313 Inner Retaining Cap, follow these steps:
- Remove the old cap by unscrewing it from the torch body.
- Clean the threads on the torch body with a wire brush or compressed air.
- Apply a small amount of anti-seize compound to the threads of the new cap.
- Screw the new cap onto the torch body until it is snug.
Troubleshooting
If you are experiencing problems with your Hypertherm plasma cutter, the inner retaining cap may be the cause. Here are some troubleshooting tips:
- Check the cap for damage or wear. If the cap is damaged, it will need to be replaced.
- Make sure the cap is properly installed. The cap should be screwed on tightly until it is snug.
- Clean the threads on the torch body and the cap. Dirt or debris can prevent the cap from sealing properly.
- If you are still experiencing problems, contact Hypertherm technical support for assistance.
Conclusion
The Hypertherm 220313 Inner Retaining Cap is an important part of your plasma cutter. By following these tips, you can ensure that your cap is properly installed and functioning correctly.
Similar Parts
C107-110
Retaining Cap, Inner, 30/50 A, SS, Air
C107-121
Retaining Cap, Inner, 400 Amp, MS
220433
260 Amp Inner Retaining Cap
220756
HPR/Nozzle Retaining Cap/130 Amp/Aluminum
220635
HPR/Nozzle Retaining Cap/400 Amp/Carbon Steel
220755
HPR/Nozzle Retaining Cap use w/ H35/N2/130 Amp/Stainless Steel
220754
HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel
220740
CAP:HPR400 260A BEVEL NOZZLE RETAINING MS
220712
HPR/Nozzle Retaining Cap/400 Amp/Stainless Steel
220243
Retaining Cap:CCW Tch-Hyspeed