Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel

Product Description

The Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel is a high-quality replacement part for Hypertherm plasma cutters. This cap is made of durable carbon steel and is designed to withstand the high temperatures and pressures generated by plasma cutting. It is easy to install and replace, and it will help to ensure that your plasma cutter is operating at peak performance.

Features

• Made of durable carbon steel
• Withstands high temperatures and pressures
• Easy to install and replace
• Ensures peak performance of your plasma cutter

Specifications

• Brand: Hypertherm
• Part number: 220754
• Part description: HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel
• Material: Carbon steel
• Dimensions: 1.5" x 1.5" x 1"
• Weight: 0.5 lbs

Compatibility

The Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel is compatible with the following Hypertherm plasma cutters:

• Powermax30XP
• Powermax45XP
• Powermax65XP
• Powermax85XP
• Powermax105XP
• Powermax125XP

Installation

To install the Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel, simply follow these steps:

1. Turn off the power to your plasma cutter.
2. Remove the old nozzle retaining cap.
3. Clean the nozzle and the area around it.
4. Apply a small amount of anti-seize compound to the threads of the new nozzle retaining cap.
5. Screw the new nozzle retaining cap onto the nozzle.
6. Tighten the nozzle retaining cap until it is snug.
7. Turn on the power to your plasma cutter.

Maintenance

To maintain the Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel, simply follow these steps:

• Inspect the cap for damage before each use.
• Clean the cap after each use.
• Replace the cap if it is damaged.

Troubleshooting

If you are experiencing problems with your Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel, here are a few troubleshooting tips:

• Check the cap for damage.
• Clean the cap and the area around it.
• Make sure that the cap is properly installed.
• If the problem persists, contact Hypertherm customer support.

Warranty

The Hypertherm 220754 HPR/Nozzle Retaining Cap/30 Amp/Carbon Steel is backed by a 1-year warranty. For more information, please see the Hypertherm website.