Hypertherm 024789 HOSE ASSY:HPR QDISC VENT

Product Description

The Hypertherm 024789 HOSE ASSY:HPR QDISC VENT is a high-quality replacement part for your Hypertherm plasma cutter. This hose assembly is designed to connect the plasma cutter to the torch, and it is responsible for delivering the plasma gas to the torch. The hose assembly is made of durable materials that are resistant to heat and chemicals, and it is designed to withstand the rigors of everyday use.

Features

• High-quality replacement part for your Hypertherm plasma cutter
• Connects the plasma cutter to the torch
• Delivers the plasma gas to the torch
• Made of durable materials that are resistant to heat and chemicals
• Designed to withstand the rigors of everyday use

Specifications

• Part number: 024789
• Brand: Hypertherm
• Product type: Hose assembly
• Material: Rubber
• Length: 10 feet
• Weight: 1 pound

Compatibility

The Hypertherm 024789 HOSE ASSY:HPR QDISC VENT is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm 024789 HOSE ASSY:HPR QDISC VENT, simply follow these steps:

1. Disconnect the old hose assembly from the plasma cutter and the torch.
2. Connect the new hose assembly to the plasma cutter and the torch.
3. Tighten the connections until they are snug.
4. Turn on the plasma cutter and test the hose assembly to make sure it is working properly.

Troubleshooting

If you are experiencing problems with the Hypertherm 024789 HOSE ASSY:HPR QDISC VENT, here are a few things you can check:

• Make sure that the hose assembly is properly connected to the plasma cutter and the torch.
• Check for leaks in the hose assembly.
• Make sure that the plasma cutter is turned on and that the gas pressure is set correctly.
• If you are still experiencing problems, contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm 024789 HOSE ASSY:HPR QDISC VENT is a high-quality replacement part for your Hypertherm plasma cutter. This hose assembly is designed to deliver the plasma gas to the torch, and it is made of durable materials that are resistant to heat and chemicals. The hose assembly is easy to install and maintain, and it is backed by Hypertherm's warranty.

Similar Parts

220161
Item is superseded, new item number is 428976 BULLET PLUG:HPR QDISC TCH

109207
CAP:6UF 370VAC 6% 50/60HZ POLYPROP .250" QDISC

128239
KIT-O-RING:400A DRY QDISC TCH

220052
SEAL:400A DRY QDISC TCH

220706
HPRXD Systems QDISC Torch Head

228117
PHC LIFTER ASSY:W/MOT/BRK/MAG BRK-AWAY ASSY-0224

024601
HOSE ASSY:1/2 BLU #8 1'11"

024549
HOSE ASSY:3/16 BLU LH 'A'24"

024656
HOSE ASSY:3/8 RED LH 'B' 15M/50'

024322
HOSE ASSY:1/4 BLU LH 'A' 35'