Hypertherm 123737 Cable: Gas Control, 25 m/82 f

Product Description

The Hypertherm 123737 Cable: Gas Control, 25 m/82 f is a genuine Hypertherm replacement part.

Specifications

• Brand: Hypertherm
• Part number: 123737
• Part description: Cable: Gas Control, 25 m/82 f
• Length: 25 m/82 f

Compatibility

The Hypertherm 123737 Cable: Gas Control, 25 m/82 f is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP

Installation

The Hypertherm 123737 Cable: Gas Control, 25 m/82 f can be installed by following these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old gas control cable from the plasma cutter.
3. Connect the new gas control cable to the plasma cutter.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 123737 Cable: Gas Control, 25 m/82 f, please refer to the following troubleshooting tips:

• Check the connections between the gas control cable and the plasma cutter.
• Make sure that the gas control cable is not damaged.
• If the problem persists, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 123737 Cable: Gas Control, 25 m/82 f is a genuine Hypertherm replacement part that is essential for the proper operation of your Hypertherm plasma cutter. By following the installation and troubleshooting tips in this document, you can ensure that your plasma cutter is operating at peak performance.